OEM Carrier Gas Valve 24V 1/2" NPT Natural Gas for Model PG8MEA060135AAJA

This genuine OEM combination gas valve, part number EF32CW210, is the factory-specified replacement for the Carrier PG8MEA060135AAJA gas furnace. The combination gas valve is the heart of your furnace's fuel delivery system — it receives a 24V signal from the control board and opens to allow precisely regulated natural gas flow to the burners. When this valve fails, you'll typically experience a complete no-heat condition: the inducer and igniter may cycle normally, but without gas flow the burners never light and the furnace enters a hard lockout. In some failure modes, the valve may stick partially open, causing delayed ignition, booming on startup, or erratic flame behavior — all of which demand immediate replacement for safety.

• Specs: 24V coil voltage | 50/60Hz | Natural gas | 3.5" W.C. outlet pressure | 1/2" NPT inlet and outlet connections | Replaces OEM cross-reference 36J24-618
• OEM vs Generic: This is a genuine Carrier OEM valve — factory-tested to exact pressure tolerances and UL-listed for your specific furnace. Aftermarket gas valves may vary in outlet pressure calibration, risking improper combustion, sooting, or nuisance lockouts on high-efficiency furnaces.
• Install difficulty: 4/5 — Gas valve replacement must be performed by a licensed HVAC technician or qualified gas fitter. Tools required: adjustable wrench, pipe thread sealant (gas-rated), manometer for outlet pressure verification, and combustible gas leak detector. Always shut off the gas supply and verify zero pressure before disconnecting. Confirm outlet pressure post-installation.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Fits Carrier model PG8MEA060135AAJA gas furnace. Note that this valve is 7/8" longer than some legacy valves it replaces — a black metal nipple and/or coupling may be required for direct installation. Verify inlet/outlet connection size and inlet gas pressure before ordering. Our technical team is available to confirm fitment before you buy.