OEM Carrier Gas Valve EF32CW210 — 24V Natural Gas Replacement for Model PG8MAA066135ACJA

This is the genuine OEM Carrier combination gas valve (part number EF32CW210), the factory-specified replacement for the Carrier PG8MAA066135ACJA gas furnace. The combination gas valve is the critical component that controls natural gas flow from the supply line into the furnace burner assembly. When it fails, the furnace will attempt ignition — the igniter will glow and the inducer will run — but gas will never reach the burners, resulting in a lockout fault code and no heat. A failed gas valve may also cause intermittent heating, soft lockouts, or a fault code indicating valve failure on the furnace control board.

• Specs: 24V coil voltage | 50/60 Hz | Natural gas | 3.5" W.C. outlet pressure (factory set) | 1/2" NPT inlet & outlet | Replaces White Rodgers 36J24-618
• OEM vs Generic: This is a genuine Carrier factory-authorized part. OEM gas valves are factory-calibrated to exact outlet pressure specs. Aftermarket alternatives may drift from the 3.5" W.C. set point, causing rich or lean combustion, nuisance lockouts, or safety shutdowns.
• Install difficulty: 3/5 — Gas valve replacement requires shutting off gas supply upstream, relieving line pressure, and carefully transferring wiring harness connectors. Tools needed: adjustable wrench, pipe thread sealant (gas-rated), multimeter, and manometer to verify outlet pressure after installation. Licensed HVAC technician strongly recommended.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Directly fits the Carrier PG8MAA066135ACJA gas furnace. Also cross-references OEM part numbers PEF32CW210 and superseded White Rodgers valve 36J24-618. Verify your unit's data plate lists a 24V, natural gas, 1/2" NPT combination gas valve before ordering. Not for use with LP/propane configurations without a certified conversion kit. Order today — in stock and ships the same business day.