OEM Carrier Gas Valve 24V Natural Gas 3.5" WC for Model PG8MAA066135ABJA

This is the factory OEM combination gas valve for the Carrier PG8MAA066135ABJA gas furnace. Part number EF32CW210 (replaces 36J24-618) is a White-Rodgers combination valve that regulates the flow of natural gas from the supply line to the burner assembly. When this valve fails, the furnace will attempt ignition — the inducer and igniter will energize — but no gas will flow, resulting in a lockout fault code, no heat, or repeated failed ignition attempts. In some cases a failing valve may cause delayed ignition, a gas odor near the unit, or an error code on the control board indicating valve circuit failure.

• Specs: 24V coil voltage | 50/60 Hz | Natural gas | Inlet/outlet: 1/2" NPT | Pressure regulator factory-set to 3.5" W.C. | Combination valve with built-in pressure regulation
• OEM vs Generic: This is a genuine Carrier factory-authorized part (EF32CW210). OEM valves are pre-set to exact manifold pressure specifications for the PG8MAA066135ABJA heat exchanger design. Generic valves often require field pressure adjustment and may not meet manufacturer warranty requirements.
• Install difficulty: 3/5 — Gas valve replacement must comply with local codes. Shut off gas supply at the main before beginning. Tools needed: adjustable wrench, pipe thread sealant (gas-rated), multimeter, manometer for manifold pressure verification. A licensed HVAC technician is strongly recommended. Always leak-check with approved solution after installation.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier PG8MAA066135ABJA gas furnaces. This valve supersedes obsolete part number 36J24-618. Verify your unit's data plate shows natural gas fuel type and 24V control circuit before ordering. Have questions about fitment? Our HVAC parts specialists confirm compatibility before every order — call or chat today.