OEM Carrier Hot Surface Igniter LH33ZG001 for Model PG8MAA060155AFJA

This is the genuine OEM Carrier hot surface igniter (part number LH33ZG001), the factory-specified replacement for the Carrier PG8MAA060155AFJA packaged gas unit. The hot surface igniter is the first critical component in the ignition sequence — on a call for heat, the control board energizes the igniter, allowing it to reach glowing temperatures before the gas valve opens. When the igniter cracks, degrades, or fails to reach proper temperature, the furnace or packaged unit will attempt ignition, fail to light the burner, and enter a safety lockout — leaving you with no heat. A failed igniter is one of the most common causes of no-heat service calls.

• Specs: 120V hot surface igniter | Silicon nitride element | Factory OEM part number LH33ZG001 | Lightweight at 0.07–0.10 lbs | Direct plug-in connector replacement
• OEM vs Generic: OEM silicon nitride igniters from Carrier are manufactured to exact resistance and wattage tolerances. Aftermarket alternatives frequently suffer from shorter element life and premature cracking due to looser manufacturing specs — risking repeat no-heat callbacks.
• Install difficulty: 2/5 — De-energize and disconnect power to the unit before beginning. Avoid touching the igniter element with bare hands — skin oils cause hot spots and premature failure. Tools needed: 1/4" nut driver, needle-nose pliers. Disconnect the harness plug, remove the mounting screws, swap the igniter, reconnect, and verify full ignition sequence on startup.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PG8MAA060155AFJA packaged gas unit. Verify your unit's part number against LH33ZG001 on your equipment's service parts list or data plate before ordering. Not sure if this is the right part? Our HVAC parts specialists verify fitment before you order — reach out before checkout.