OEM Carrier Furnace Hot Surface Igniter for PG8MAA060155AEJA

The hot surface igniter is the component that physically lights the gas at your furnace burners. On each call for heat, the control board sends voltage to the igniter, which glows white-hot and ignites the gas as the valve opens. When it cracks, ages, or burns out, the most common symptom is a furnace that clicks, runs the inducer and blower for 30–60 seconds, then shuts down with no heat — often locking out after three failed tries. Homeowners frequently notice cold air from the registers, repeated short-cycling, and a clean reset whenever power is cut and restored. This OEM Carrier igniter is a silicon nitride element, which is far more durable and impact-resistant than older silicon carbide igniters. Cold resistance typically falls in the 40–90 ohm range; an open circuit or a reading far outside spec confirms a failed unit. The mounting bracket, gas-orifice spacing, and connector are matched exactly to the PG8MAA furnace. Why OEM matters here: aftermarket universal igniters often use thinner silicon carbide elements with looser resistance specs that won't reach full ignition temperature on a cold start, causing intermittent no-heat calls and premature failure. A correct-resistance OEM element glows hot enough, every cycle. Install difficulty: 2 of 5. Tools: 1/4" nut driver, Phillips screwdriver, and work gloves (the ceramic element is fragile — handle only by the bracket). #1 safety warning: shut off the gas supply and kill power at the furnace switch and breaker before servicing. Never touch the white ceramic with bare fingers; skin oils create hot spots that shorten its life. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8MAA060155AEJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.