OEM Carrier Gas Furnace Hot Surface Igniter for PG8MAA060155ABJA

The hot surface igniter (HSI) is the part that lights the gas burners on your Carrier PG8MAA. On a call for heat, the control board feeds 120 VAC to the igniter, which glows bright orange (about 2000-2500°F) so the burners ignite the instant the gas valve opens. Igniters are brittle and rank as the most common no-heat failure: when one cracks or burns open you get cold air from the registers, repeated clicking or relay chatter, or a furnace that spins the inducer and blower but never makes heat — typically ending in a hard lockout after a few failed ignition trials. Handling the element with bare fingers also shortens its life, since skin oils create hot spots that fracture the element. Specs: Carrier PG8MAA units typically use a 120 VAC silicon nitride igniter, which is much tougher and more shock-resistant than older silicon carbide "M-series" igniters. Cold resistance for a silicon nitride element usually reads in the 40-75 ohm range at room temperature (silicon carbide types read differently); an open or infinite reading means the element is cracked and needs replacement. Match the mounting bracket and plug orientation to your unit. OEM vs Generic: The OEM silicon nitride igniter is matched to the board's exact voltage ramp and timing. Generic igniters often carry different resistance and mass, so they fail to reach ignition temperature inside the board's trial-for-ignition window — producing delayed ignition (a small "whoomp" of accumulated gas) or repeated lockouts, while the wrong resistance overstresses the board's igniter relay. Install: Difficulty 2/5. Tools: 1/4" nut driver, multimeter. Handle by the ceramic base only. #1 safety warning: TURN OFF THE GAS and shut the breaker before servicing. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8MAA060155ABJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.