OEM Carrier Gas Valve 24V Natural Gas 3.5" WC for Model PG8MAA048090ADJA

This is the factory OEM combination gas valve for the Carrier PG8MAA048090ADJA 80% AFUE gas furnace. The gas valve is the heart of your furnace's fuel delivery system — it receives a 24V signal from the integrated furnace control board and opens to allow precisely regulated natural gas flow to the burners for ignition. When this valve fails, the result is a hard no-heat lockout: the inducer runs, ignition is attempted, but no gas reaches the burners. You may also see error codes for gas valve fault or pressure failure on your board. Part number EF32CW210 replaces the legacy White-Rodgers cross-reference 36J24-618.

• Specs: 24V coil voltage | 50/60 Hz | Natural gas | 3.5" W.C. outlet pressure (factory set) | 1/2" NPT inlet and outlet connections | Combination valve design (shutoff + regulator)
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part. OEM gas valves are calibrated to exact outlet pressure specs for your burner orifices. Aftermarket valves risk mis-set regulator pressure, leading to incomplete combustion, sooting, or repeat failures — never compromise on a gas valve.
• Install difficulty: 3/5 — Gas work requires caution. Shut off the manual gas supply before beginning. Tools needed: adjustable wrench, pipe thread sealant (yellow PTFE tape for gas), 1/4" nut driver, leak-detection solution. Always perform a leak test after installation before restoring power. If you are not certified, consult a licensed HVAC technician.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse — fast delivery to get your heat back on quickly.

Compatibility: Engineered for the Carrier PG8MAA048090ADJA gas furnace. Cross-references: EF32CW210, 36J24-618, PEF32CW210. Confirm your unit's fuel type (natural gas) and gas supply pressure before ordering. Have questions about fitment? Our HVAC parts specialists verify compatibility before you buy — contact us today and ship the same day.