OEM Carrier Flame Sensor Rod for Gas Furnace PG8MAA036110AAJA

The flame sensor is the single rod that confirms to your Carrier PG8MAA036110AAJA package unit that a real flame is burning. Once the igniter lights the burners, this rod relies on flame rectification — detecting the tiny DC microamp current that flame conducts to ground — to prove ignition to the control board. If that signal doesn't appear within seconds, the board closes the gas valve as a safety lockout. This makes a dirty or worn flame sensor the number-one no-heat complaint: the furnace lights for 3–7 seconds, the flame drops, and the unit short-cycles or locks out. Owners notice repeated clicking, brief warm air that turns cold, and intermittent lockout fault codes. This is a stainless/Kanthal flame-sensing rod mounted on a ceramic insulator with a 1/4" spade terminal. A healthy circuit produces about 1–6 microamps DC of flame current; readings under roughly 0.5 µA trip lockout. The rod's length, bend, and insulator must match so the tip sits correctly in the burner flame envelope. Genuine OEM matters because aftermarket rods often use thinner alloy that oxidizes quickly and cheaper ceramic that hairline-cracks, bleeding the microamp signal to ground and causing the intermittent lockouts that are so frustrating to chase down. The OEM rod holds its signal strength far longer. Install difficulty: 1 of 5. Tools: 1/4" nut driver and a multimeter set to DC microamps. Replace a worn rod rather than just sanding it. #1 safety warning: TURN OFF THE GAS and kill power at the breaker before reaching into the burner compartment. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8MAA036110AAJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.