OEM Carrier Gas Valve 24V Natural Gas 3.5" WC for Model PG8MAA036070ACJA

This OEM combination gas valve (part #EF32CW210) is the factory-specified replacement for the Carrier PG8MAA036070ACJA gas furnace. The gas valve is the heart of your furnace's fuel delivery system — it receives a 24V signal from the control board and opens to allow natural gas to flow to the burners. When the valve fails, the result is a complete no-heat condition: the inducer may run, the igniter may glow, but no gas reaches the burners, triggering a safety lockout. A faulty valve may also cause intermittent heating, delayed ignition, or a soft lockout with a fault code pointing to an open gas valve circuit.

• Specs: 24V coil voltage | 50/60 Hz | Natural gas | 3.5" W.C. outlet pressure (factory set) | 1/2" NPT inlet connection | Replaces legacy part 36J24-618
• OEM vs Generic: This is a genuine Carrier OEM valve built to exact factory tolerances. Generic aftermarket valves may vary in leak-off rates and actuation timing, creating unsafe conditions. For a safety-critical component like a gas valve, OEM is always the recommended choice.
• Install difficulty: 3/5 — Shut off the gas supply at the manual shutoff and confirm zero pressure before disconnecting fittings. Tools needed: adjustable wrench, pipe thread sealant (gas-rated), 1/4" nut driver, manometer for post-install pressure verification. Gas valve replacement should be performed by a licensed HVAC technician.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered and factory-matched for the Carrier PG8MAA036070ACJA gas furnace. Always verify the OEM part number on your existing valve's label before ordering. For fitment questions, our HVAC parts specialists are available to confirm compatibility before you buy — order today and get same-day shipping.