OEM Carrier Gas Valve 24V Natural Gas 3.5" WC for Model PG8MAA036070ABJA

This is the genuine OEM combination gas valve (part #EF32CW210) factory-specified for the Carrier PG8MAA036070ABJA gas furnace. The gas valve is the heart of your furnace's fuel-delivery system — it receives the 24V signal from the control board, opens to allow natural gas flow to the burners, and closes instantly on any fault condition. When this valve fails, the furnace will either lock out with no heat, fail to ignite despite a working igniter, or shut off gas flow mid-cycle. If your furnace goes through the ignition sequence but produces no flame — and your igniter and flame sensor check out — a faulty gas valve is the most likely culprit.

• Specs: 24V AC coil | 50/60 Hz | Natural gas | 3.5" W.C. outlet pressure (factory set) | 1/2" NPT inlet connection | Replaces OEM cross-reference 36J24-618 (White Rodgers)
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part (FAP). OEM valves are pre-set to the exact 3.5" W.C. outlet pressure required by the PG8MAA036070ABJA burner assembly. Aftermarket valves may require field adjustment and can void remaining equipment warranties.
• Install difficulty: 3/5 — Gas valve replacement involves working on the gas supply line. Shut off the gas supply at the manual shutoff before beginning. Tools needed: adjustable wrench, pipe thread sealant (gas-rated), 1/4" nut driver, multimeter (to verify 24V coil signal). A licensed HVAC technician is strongly recommended. Leak-test all connections with approved solution after installation.
• Warranty: 1-year OEM manufacturer warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed as the direct OEM replacement for Carrier model PG8MAA036070ABJA gas furnaces. Also cross-references part numbers 36J24-618 and PEF32CW210. Verify your existing valve's inlet size, outlet pressure rating, and voltage before ordering. Our fitment team is available to confirm compatibility before you purchase — ships free on orders over $99.