OEM Carrier Hot Surface Igniter for PG8JEB060110AAJA Furnace

The hot surface igniter is the component that physically lights your gas burners. On every call for heat the control board sends 120 volts to the igniter, which glows white-hot near 2000°F and ignites the gas at the burner manifold. When the element cracks or simply wears out, you'll hear the inducer motor and gas valve cycle but get no ignition: repeated relay chatter and clicking, a multi-flash fault code, cold air from the registers, and no heat. A weakening igniter may glow dimly or light late, producing a delayed "whoomp" rollout that is both alarming and unsafe. This igniter is built for 120 VAC operation and matched to the Carrier/Bryant ignition control on this furnace. Silicon nitride elements (more durable and shock-resistant) typically read a cold resistance of roughly 11 to 50 ohms, while silicon carbide versions read higher, around 40 to 90 ohms. An open or out-of-range reading on your multimeter confirms a failed element. The mounting bracket positions the tip precisely in the gas stream for reliable light-off. OEM matters because generic igniters use thinner, lower-grade elements with wider resistance tolerances. They often fail to reach full ignition temperature or crack from thermal shock after only a season, leaving you with intermittent no-heat calls. The genuine part holds the correct resistance and element mass for fast, repeatable ignition and long service life. Install difficulty: 2 of 5. Tools needed: 1/4" nut driver and a multimeter set to ohms. #1 safety warning: shut off the gas and kill the furnace breaker, and NEVER touch the element with bare fingers; skin oil creates hot spots that shatter the igniter on its first cycle. Handle it only by the ceramic base. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8JEB060110AAJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.