OEM Carrier Gas Valve Replacement for Gas Furnace PG8JEB036070AAJA

The gas valve is the heart of your Carrier furnace's fuel delivery, metering and regulating gas to the burners on every call for heat. On the ignition sequence the control board energizes the valve's redundant 24VAC solenoids, opening fuel flow once the igniter is hot. When the valve coil opens, the regulator drifts, or the internal solenoid sticks, the furnace will not light: the igniter glows or the inducer runs, but no flame appears. Homeowners notice repeated no-heat lockouts, a furnace that clicks but never fires, or burners that ignite weakly and roll out. Specs: this is a 24VAC redundant gas valve with a built-in pressure regulator. Manifold pressure for natural gas is set near 3.5" WC (about 10-11" WC LP after conversion with the correct kit). The dual-solenoid redundant design is a code-required safety feature, and the regulator must be checked with a manometer after replacement. OEM matters most on the gas valve because the regulator is factory-calibrated to deliver the precise manifold pressure your heat exchanger was engineered for. Generic valves frequently have looser regulator tolerance, which over-fires (cracking the heat exchanger and risking CO) or under-fires (sooting and poor efficiency). An OEM valve holds the correct pressure and matches the board's solenoid current draw. Install difficulty: 3 of 5. Tools: 1/4" and 5/16" nut drivers, an adjustable/pipe wrench, a manometer to set and verify manifold pressure, a leak detector or soapy water, and a multimeter. #1 safety warning: shut off the gas at the manual upstream shutoff and kill power before removing the valve, then leak-test every joint before relighting. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8JEB036070AAJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.