OEM Carrier Hot Surface Igniter LH33ZG001 for Model PG8JEA060135ABJA

This is the genuine OEM hot surface igniter (part number LH33ZG001) factory-specified for the Carrier PG8JEA060135ABJA packaged gas unit. During a call for heat, the control board energizes the igniter, which heats to approximately 2,500°F to ignite the gas burner. When the igniter fails — whether from age, thermal fatigue, or hairline cracking — the control board detects no flame and locks out, leaving your system with a no-heat condition. Common symptoms include the inducer running normally but the burner never lighting, followed by a lockout fault code after 1–3 ignition attempts.

• Specs: 120V hot surface igniter | Factory OEM part number LH33ZG001 | Silicon element | Direct plug-in connector | Weighs approximately 0.07–0.10 lbs
• OEM vs Generic: This is a genuine Carrier OEM igniter manufactured to exact factory tolerances for element resistance and thermal cycling durability. Generic or aftermarket igniters may vary in element geometry and resistance, increasing the risk of premature failure or nuisance lockouts.
• Install Difficulty: 2/5 — Always de-energize and lock out the unit before servicing. Avoid touching the igniter element with bare hands — skin oils cause premature failure. Tools needed: nut driver, needle-nose pliers. Disconnect the harness plug, remove the mounting screw(s), install the new igniter, and reconnect. Verify ignition on first call for heat.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PG8JEA060135ABJA packaged gas unit. Always cross-reference your unit's data plate and parts list to confirm LH33ZG001 is the specified igniter before ordering. Have questions about fitment? Our HVAC parts specialists verify compatibility before you order — no guesswork.