OEM Carrier Hot Surface Igniter for PG8JAA060155AAJA Furnace

The hot surface igniter is what lights the burners in your Carrier PG8JAA060155AAJA gas furnace. Each time the thermostat calls for heat, the control board energizes this igniter with 120 volts, heating its element to roughly 2,000 degrees Fahrenheit so it can ignite the gas as the valve opens. When the igniter cracks or weakens, the furnace will click and attempt to start but never light, short-cycle on the burners, or run the blower while only pushing cold air. A common homeowner symptom is hearing the inducer motor spin up several times in a row, each followed by silence and no heat, before the board locks out. This is a silicon nitride hot surface igniter, the more durable successor to the older, brittle silicon carbide design. Silicon nitride resists thermal shock and survives far more heating cycles before failing. A healthy igniter typically measures between 40 and 90 ohms cold across its two terminals; an open-circuit (OL) reading, or resistance well outside that range, confirms a burned-out element. It operates on 120 VAC line voltage and mounts in the original Carrier bracket position. Choosing OEM matters here because igniter resistance and glow temperature are matched to your furnace's ignition timing. Generic aftermarket igniters often carry wider resistance tolerances and lower-grade elements that fail to glow hot enough, causing delayed ignition, rough light-off that can produce a small whoomp, and premature burnout. An OEM igniter glows to the correct temperature within the board's trial-for-ignition window every cycle. Installation difficulty: 2 of 5. Tools needed: 1/4-inch nut driver, multimeter, and gloves (never touch the element with bare fingers, since skin oil shortens its life). Safety first: shut off the gas supply and kill power at the furnace switch and breaker before servicing. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8JAA060155AAJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.