OEM Carrier Gas Valve EF32CW210 for Model PG8JAA036070AEJA
This is the factory OEM combination gas valve for the Carrier PG8JAA036070AEJA packaged gas/electric unit. The gas valve is the heart of the heating system — it controls the flow of gas to the burners in direct response to 24V signals from the control board. When this valve fails, the result is typically a complete loss of heat: the inducer will run, the igniter will glow, but no gas will flow and the system enters a safety lockout. A faulty valve can also cause delayed ignition, intermittent heating, or a hard lockout fault code on the board.
-
Specs: OEM Part Number EF32CW210 | Combination gas valve | 24V coil voltage | Factory-matched inlet/outlet sizing for the PG8JAA036070AEJA burner assembly
-
OEM vs Generic: This is a genuine OEM Carrier part, manufactured to exact factory specifications. Generic valves may vary in coil sensitivity and internal orifice sizing, potentially causing nuisance lockouts or unsafe gas pressures — always use OEM on gas-carrying components.
-
Install difficulty: 4/5 — Gas valve replacement requires shutting off the manual gas supply, relieving line pressure, disconnecting wiring harness connectors, and re-torquing fittings to spec. Tools needed: adjustable wrench, pipe thread sealant (approved for gas), multimeter, and manometer for outlet pressure verification. Note: Always leak-test all fittings with an approved gas leak detector solution before restoring power.
-
Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before 3PM EST.
Compatibility: Engineered as a direct OEM replacement for Carrier model PG8JAA036070AEJA packaged gas/electric units. Confirm your existing valve's part number and inlet/outlet configuration against your unit's data plate before ordering. Not sure it fits? Our HVAC parts specialists verify fitment before you buy — contact us before placing your order.