OEM Carrier Hot Surface Igniter LH33ZG001 for Model PG8JAA024070AGJA

This is the factory OEM hot surface igniter (part #LH33ZG001) for the Carrier PG8JAA024070AGJA packaged gas unit. The igniter is a safety-critical component that glows to ignition temperature during every heating cycle, lighting the gas burner on demand. When it fails — due to hairline cracks, surface contamination, or end-of-life thermal fatigue — the control board detects an unsuccessful ignition attempt and locks out the furnace, leaving you with no heat. Replacing with the correct OEM part restores factory ignition reliability and prevents repeat service calls.

• Specs: 120V hot surface igniter | Silicon nitride element | Includes bracket and wiring harness | Factory-matched for Carrier PG8JAA024070AGJA packaged units
• OEM vs Generic: OEM igniters are manufactured to exact resistance and thermal-shock tolerances specified by Carrier. Generic igniters may vary in warm-up time and element geometry, risking mis-timed ignition events or premature failure — especially in packaged rooftop applications with high thermal cycling.
• Install difficulty: 2/5 — De-energize and lock out the unit before starting. Never touch the igniter element with bare hands — skin oils cause hot spots that crack the ceramic under heat. Tools needed: 1/4" nut driver, needle-nose pliers. Photograph harness routing before disconnecting. Verify ignition sequence on first call for heat after installation.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier PG8JAA024070AGJA packaged gas heating units specifying part #LH33ZG001. Always cross-reference your unit's data plate and parts list before ordering. Not sure if this is your part? Our HVAC parts specialists verify fitment before you buy — contact us anytime.