OEM Carrier Gas Valve 24V 3.5" WC 1/2" NPT for Model PG8JAA024070AFJA

This is the OEM factory-specified combination gas valve for the Carrier PG8JAA024070AFJA gas furnace. The gas valve controls the flow of natural gas from the supply line to the burners, opening on a 24V signal from the furnace control board after the igniter has reached operating temperature. When this valve fails, the furnace will attempt ignition — you may hear the igniter glow and the inducer run — but no gas will flow, resulting in a hard lockout with no heat delivered. Common failure symptoms include repeated ignition attempts with no flame, an error code for gas valve fault, or a furnace that locks out after 3 tries.

• Specs: 24V coil voltage | 50/60 Hz | Natural gas | 3.5" W.C. outlet pressure (factory set) | 1/2" NPT inlet & outlet | Replaces OEM cross-reference 36J24-618
• OEM vs Generic: This is a genuine Carrier OEM part (EF32CW210), manufactured to factory tolerances and pressure settings. Generic valves may have inconsistent outlet pressure calibration, risking improper combustion, nuisance lockouts, or carbon monoxide hazard — always use OEM on gas-carrying components.
• Install difficulty: 3/5 — Gas valve replacement requires shutting off the gas supply and verifying zero pressure before disconnecting lines. Tools needed: adjustable wrench, pipe thread sealant (gas-rated), 1/4" and 5/16" nut drivers, multimeter to verify 24V signal. A licensed HVAC technician or gas fitter is recommended in most jurisdictions.
• Warranty: 1-year OEM factory warranty against defects. In-stock and ships same business day from our warehouse.

Compatibility: Engineered as the direct OEM replacement for Carrier model PG8JAA024070AFJA. Cross-references include part numbers 36J24-618 and PEF32CW210. Verify your existing valve's inlet/outlet size and pressure rating on your unit's data plate before ordering. Have a question about fitment? Our HVAC parts specialists verify compatibility before you buy — reach out before placing your order.