OEM Carrier Hot Surface Igniter Replacement Kit 332505-751 for Model PG8DAA060135ACJA

This OEM hot surface igniter kit (part# 332505-751) is the factory-specified replacement for the Carrier PG8DAA060135ACJA gas furnace. The hot surface igniter is the critical first step in every heating cycle — the control board energizes it to reach ignition temperature (typically 1,800–2,500°F), which then lights the burner. When the igniter fails, the furnace will attempt to light, fail to prove flame, and enter a lockout sequence — leaving you with no heat. Common symptoms include repeated ignition attempts with no burner flame, a glowing-then-dark igniter with no ignition, or an immediate hard lockout with a fault code.

• Specs: Silicon nitride hot surface igniter | Factory-matched voltage and wattage | OEM Carrier Ignitor Replacement Kit — includes igniter and mounting hardware | Direct drop-in fit for Carrier PG8DAA060135ACJA
• OEM vs Generic: This OEM kit is engineered to Carrier's exact thermal cycling specifications. Aftermarket igniters frequently use lower-grade silicon carbide elements with shorter service lives, inconsistent warm-up times, and looser dimensional tolerances — risking misfire and premature cracking.
• Install Difficulty: 3/5 — Shut off gas supply and 120V power before beginning. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, work gloves. Never touch the igniter element with bare hands — skin oils cause premature cracking. Photograph wiring harness before disconnecting. Standard swap takes 20–40 minutes for an experienced tech.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed specifically for the Carrier PG8DAA060135ACJA packaged gas furnace. Always verify your existing igniter's voltage rating and element profile against your unit's data plate before ordering. Not sure it fits? Our HVAC parts specialists verify fitment before you buy — contact us before placing your order.