OEM Carrier Flame Sensor for PG8DAA060115ADJA Gas Furnace Unit

The flame sensor is the safety device that proves your Carrier furnace's burners have actually ignited. It's a single metal rod that sits in the flame and uses flame rectification to send a microamp signal back to the control board. If that signal disappears, the board shuts the gas valve in seconds to prevent raw gas from filling the heat exchanger. When this part fails or fouls, the most common symptom is short-cycling: the burners light, glow for 3-7 seconds, then drop out, and the furnace tries again two or three times before locking out and blowing cold air. Many homeowners notice the system runs fine for one cycle each morning, then quits. This is an OEM silicon-tipped flame rod with the correct rod length, bend angle, and ceramic insulator to seat properly in the burner box. A healthy sensor reads a flame current of roughly 1-6 microamps DC; below about 0.5 microamps the board will reject the flame. The factory rod alloy resists oxidation and the silica-glaze buildup that causes false flame-loss faults. OEM matters here because aftermarket rods often use thinner alloys and loose-fitting brackets that warp, drift out of the flame, and foul within a single heating season. The factory part holds calibration and mounting geometry so the board reads a clean, stable signal. Install difficulty: 1 of 5. Tools: 1/4" nut driver and fine emery cloth or steel wool. SAFETY: turn off the furnace at the breaker AND shut the gas valve before removing the sensor; the rod sits directly in the burner path. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8DAA060115ADJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.