OEM Carrier Hot Surface Igniter for Gas Furnace PG8DAA060115AAJA

The hot surface igniter is the component that lights the gas at the burners on your Carrier PG8DAA060115AAJA. On every call for heat, the control board sends 120V to the igniter, which glows white-hot and ignites the burner manifold. When it fails, the most common symptom is no heat: you hear the inducer spin up and the gas valve click, but the burners never light, and the furnace locks out after three or four failed attempts (often flashing a fault code). A cracked or aged element can also cause delayed ignition with a small 'whoomp' as gas pools before lighting. This is a silicon carbide hot surface igniter operating on 120VAC. A healthy unit reads roughly 40-75 ohms cold across the terminals; an open (infinite) reading means it is dead, and a drifting reading predicts imminent failure. Silicon carbide elements are brittle, so never touch the glow tip with bare fingers, as skin oils create hot spots that crack it early. OEM matters here because the igniter is matched to the furnace's ignition timing and amp draw. Generic igniters often have different resistance and mass, so they reach ignition temperature too slowly or too hot for what the board expects, causing delayed ignition, flame rollout, or premature cracking. Silicon nitride 'universal' replacements change the heating curve entirely. Install difficulty: 2/5. Tools: 1/4" nut driver and a multimeter. SAFETY: shut off the gas and kill power at the breaker before servicing, and handle the new igniter only by its ceramic base. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8DAA060115AAJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.