OEM Carrier Hot Surface Igniter Replacement Kit 332505-751 for Model PG8DAA048095ADJA

This OEM hot surface igniter replacement kit (part number 332505-751) is the factory-specified ignition component for the Carrier PG8DAA048095ADJA packaged gas unit. The igniter is responsible for reaching the high surface temperatures needed to light the burner assembly on each call for heat. When it fails, the control board will attempt ignition, detect no flame via the flame sensor, and trigger a hard lockout — leaving you with a no-heat condition and a flashing fault code on the board.

• Specs: Silicon nitride hot surface igniter | 120V nominal operating voltage | Factory-matched mounting bracket and lead wire included in kit | Direct OEM replacement for Carrier part 332505-751
• OEM vs Generic: This is a genuine Carrier OEM igniter kit, manufactured to exact factory specifications. Generic igniters often use inferior silicon carbide elements with shorter service life and higher cracking rates, leading to repeat no-heat failures and callback costs.
• Install Difficulty: 3/5 — Always disconnect power before servicing. Never touch the igniter element with bare hands — skin oils cause premature failure. Tools needed: 1/4" and 5/16" nut driver, needle-nose pliers, basic multimeter for continuity check (~40–90Ω for a healthy igniter). Replace the igniter with care; the element is brittle.
• Warranty: 1-year OEM factory warranty against defects. Orders placed before cutoff ship same business day from our warehouse.

Compatibility: Designed for the Carrier PG8DAA048095ADJA packaged gas/electric unit. Verify your existing igniter element type and mounting configuration against your unit's data plate and wiring diagram before ordering. Our technical team is available to confirm fitment — just reach out before you buy. In stock and ready to ship today.