OEM Carrier Gas Furnace Flame Sensor for Model PG8DAA036095ACJA

The flame sensor in your Carrier PG8DAA036095ACJA is a flame-rectification rod whose only job is to confirm the burners actually lit. Once the burners ignite, the rod sits in the flame and conducts a small rectified current back to the control board as 'proof of flame.' When the rod becomes coated in oxide, cracks, or the porcelain insulator breaks down, the board loses that signal and closes the gas valve within a few seconds for safety. The result a homeowner sees is a furnace that lights, runs for several seconds, then blows cold air and quits — repeated short-cycling that often ends in a hard lockout with no heat. This is a single-rod micro-amp device. A clean, properly positioned rod usually produces about 1–6 microamps; when the rectified signal drops under roughly 0.5–1 µA the board refuses to keep the gas valve open. The rod alloy and glazed porcelain standoff are dimensioned for the exact flame position in this Carrier burner assembly. OEM matters because flame current depends on rod length, depth, and metallurgy. Aftermarket rods tend to oxidize sooner and frequently sit at the wrong point in the flame, dragging the microamp reading down and producing intermittent nuisance lockouts. A genuine OEM sensor returns a steady, in-spec signal. Install difficulty: 2 of 5. Tools: a 1/4" nut driver, a multimeter with a microamp range, and fine emery cloth or steel wool. #1 safety warning: turn off the gas supply and cut power to the furnace before working near the burners. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8DAA036095ACJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.