OEM Carrier Flame Sensor for PG8DAA036050ADJA Packaged Unit

The flame sensor is the safety device that proves a flame is actually present after your PG8DAA036050ADJA lights. It uses flame rectification — a microamp current that passes through the burner flame to the control board — to confirm ignition. When it fails or fouls, the board sees no flame signal and shuts the gas valve within seconds. Homeowners notice the furnace lighting briefly then shutting off, repeated short-cycling on a call for heat, and eventually a hard lockout with no warm air at the registers even though the igniter glows. This is a single-rod silicon flame sensor with a stainless-steel sensing element and a high-temperature ceramic insulator rated for direct burner-flame exposure. It reads a healthy rectified signal in the 2–6 microamp range; a coated or cracked rod drops that current below the board's threshold. OEM rods match the exact length, bend, and mounting bracket so the tip sits correctly in the flame envelope. Why OEM matters here: generic sensors often use thinner or differently-alloyed rods that oxidize faster and sit at the wrong depth, producing weak or drifting microamp readings that cause nuisance lockouts. The OEM part holds its position and signal strength over far more heating cycles. Install difficulty: 2 of 5. Tools: 1/4" nut driver, fine emery cloth or Scotch-Brite, and a multimeter capable of microamp DC measurement. SAFETY: shut off gas at the valve and kill power at the breaker before removing the burner-compartment sensor — never service it with the gas on. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8DAA036050ADJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.