OEM Carrier Hot Surface Igniter Kit 332505-751 for Model PG8DAA024050ABJA

This is the factory-specified OEM hot surface igniter replacement kit (part number 332505-751) for the Carrier PG8DAA024050ABJA gas furnace. The hot surface igniter is the critical component that glows red-hot to ignite the gas burner on every heating cycle. When it fails, the furnace control board will attempt ignition 2–3 times and then lock out, leaving you with no heat. Common symptoms include a furnace that runs the inducer and opens the gas valve but never lights, or a system that trips a lockout fault code shortly after a heating call begins.

• Specs: 120V hot surface igniter | Silicon carbide element | Includes mounting bracket, wire harness, and plug connector — everything needed for a complete, factory-matched installation
• OEM vs Generic: This OEM kit is manufactured to Carrier's exact voltage, wattage, and mechanical tolerances. Generic igniters frequently deviate in surface temperature and element geometry, leading to nuisance lockouts, premature cracking, and shortened service life.
• Install Difficulty: 2/5 — Power down and lock out the furnace before beginning. Tools needed: 1/4" nut driver, needle-nose pliers, and a smartphone to photograph the existing wiring. Never touch the igniter element with bare hands — skin oils cause hot spots that crack the element prematurely. Use gloves or handle by the bracket only.
• Warranty: 1-year OEM factory warranty against defects. Orders placed before our same-business-day cutoff ship from our warehouse today.

Compatibility: Designed for the Carrier PG8DAA024050ABJA gas furnace. This kit (332505-751) is also cross-referenced as a direct upgrade replacement for legacy Carrier igniter assemblies across select mid-efficiency 80% AFUE furnace platforms. Always confirm your model's data plate and existing part number before ordering. Our HVAC parts specialists are available to verify fitment — contact us before you buy for complete peace of mind.