OEM Carrier Gas Valve EF32CB212 for Model GA2AAD036070ABJA

This is the OEM factory-specified combination gas valve (part number EF32CB212) for the Carrier GA2AAD036070ABJA packaged gas/electric or split-system furnace unit. The gas valve is the critical component that regulates and controls the flow of natural gas or propane to the burner assembly. When this valve fails, the system will typically enter a hard lockout after one or more failed ignition attempts, display a fault code on the control board, or simply produce no heat whatsoever — even when the igniter is confirmed operational. A failed valve can also cause weak or intermittent flames, leading to nuisance shutdowns via the flame sensor.

• Specs: OEM Part Number EF32CB212 | Combination gas valve | 24V coil voltage | Compatible with natural gas and LP (verify configuration) | Factory-matched inlet/outlet port sizing for direct drop-in replacement
• OEM vs Generic: OEM gas valves are manufactured to exact pressure and flow tolerances required by your Carrier unit. Generic aftermarket valves frequently exhibit improper gas pressure regulation, which can cause delayed ignition, sooting, or unsafe operation. For a safety-critical component like a gas valve, OEM is strongly recommended.
• Install Difficulty: 4/5 — Gas valve replacement involves working with live gas lines and should be performed by a licensed HVAC technician. Tools required: pipe wrench, gas leak detector solution or electronic sniffer, manifold gauge (if verifying gas pressure), multimeter, and thread sealant rated for gas. Always shut off the manual gas supply and 24V power before beginning. Recheck all fittings for leaks after installation.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. In-stock and ships same business day from our climate-controlled warehouse.

Compatibility: This gas valve is the direct OEM replacement for the Carrier GA2AAD036070ABJA. The GA2AAD036 designation indicates a 3-ton capacity gas/electric packaged unit. Always verify the existing valve's part number on the data plate or valve body before ordering to confirm fitment. If you have any questions about compatibility, our parts team verifies fitment before you order — no guesswork required.