OEM Carrier Control Transformer 40VA 120V/24V for Model CH13NA04800GAABA
This OEM replacement control transformer (part number HT01AW229) is the factory-specified unit for the Carrier CH13NA04800GAABA split-system condenser. The transformer steps down 120V line voltage to the 24V signal used by the thermostat, contactor coil, and all low-voltage control circuits. When it fails, the entire control circuit goes dark — the thermostat loses power, the contactor won't energize, and the system sits completely unresponsive even though line voltage is present at the unit.
-
Specs: 40VA rated | Primary: 120V | Secondary: 24V | Factory-matched HT01AW229 OEM part | Hardwired terminal connections
-
OEM vs Generic: This OEM transformer is wound to Carrier's exact VA rating and insulation class, ensuring the secondary voltage holds steady under full control-circuit load. Undersized generic transformers can sag below 24V, causing intermittent lockouts and contactor chatter that damages downstream components.
-
Install difficulty: 2/5 — Shut off all power to the unit before beginning. Tools needed: flathead and Phillips screwdrivers, multimeter (verify 0V before touching terminals), wire nuts or spade connectors. Photograph existing wiring before disconnecting. Confirm primary reads ~120V and secondary reads ~24V after installation.
-
Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before 3PM local time.
Compatibility: Engineered specifically for the Carrier CH13NA04800GAABA 4-ton split-system condenser. Verify your existing transformer's VA rating and primary/secondary voltages on the unit's data plate before ordering. Our fitment team is available to confirm compatibility — reach out before you buy if you have any questions.