OEM Carrier Condenser Fan Motor for Model CH13NA04200GACBA

This is the factory-specified OEM condenser fan motor for the Carrier CH13NA04200GACBA split-system air conditioner. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, dissipating heat and allowing the refrigerant cycle to function efficiently. When this motor fails, the condenser unit will overheat, trigger high-pressure lockout, or stop cooling entirely — often accompanied by a buzzing sound or the fan blade simply not spinning at startup. Replaces OEM part numbers HC39GE226 and HB39GQ230.

• Specs: 1/4–1/2 HP | 208–230V single-phase | Permanent Split Capacitor (PSC) design | Factory-matched RPM and rotation direction | 48-frame | 1/2" shaft diameter — verify against your unit's data plate before ordering
• OEM vs Generic: OEM motors ship with factory-calibrated winding resistance, thermal overload protection, and correct rotation pre-set. Aftermarket motors frequently use undersized windings and looser tolerances, leading to premature bearing failure and reduced efficiency.
• Install difficulty: 3/5 — Disconnect power and lock out the unit before beginning. Tools needed: 1/4" and 5/16" nut drivers, blade balancing tool (recommended), multimeter, capacitor discharge tool. Note blade pitch and orientation before removal; improper reassembly causes airflow reversal and repeat motor failure.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Orders placed before 3 PM EST ship same business day from our climate-controlled warehouse.

Compatibility: Engineered for Carrier CH13NA04200GACBA condenser units. Cross-references OEM part numbers HC39GE226 and HB39GQ230. Always confirm horsepower, voltage, RPM, rotation, and shaft diameter against the motor data plate on your existing unit before installing. Our parts specialists are available to verify fitment — contact us before you order if you have any questions.