OEM Carrier Condenser Fan Motor HC37GE219 for Model CH13NA03600GACAA

This is the factory OEM condenser fan motor (part number HC37GE219) for the Carrier CH13NA03600GACAA single-stage split-system air conditioner. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat from the refrigerant. When this motor fails, the system will overheat, trip the high-pressure limit, and shut down — leaving you with a no-cool call and a hot condenser cabinet. Common failure signs include a humming outdoor unit with a stationary fan, intermittent shutdowns on hot days, or a motor that is hot to the touch and trips the thermal overload.

• Specs: Factory-matched HP, RPM, and shaft diameter | 208–230V single-phase | Correct rotation direction pre-set from factory | Weatherproof sleeve bearing construction rated for outdoor use
• OEM vs Generic: The OEM HC37GE219 is wound to exact factory torque and RPM specifications for the CH13NA03600GACAA. Generic motors frequently use substitute bearings and looser speed tolerances, which can reduce airflow across the coil, raise head pressure, and shorten compressor life — costing far more in the long run.
• Install difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: 1/4" and 5/16" nut drivers, adjustable wrench, multimeter, and blade puller if fan blade is press-fit. Photograph all wiring and blade orientation (push or pull) before removal. Torque the set screw on the blade hub firmly to prevent wobble.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Ships same business day from our climate-controlled warehouse.

Compatibility: Engineered and tested specifically for the Carrier CH13NA03600GACAA 3-ton single-stage R-410A condenser. Always confirm the voltage, HP, RPM, and shaft diameter on your existing motor's data label before ordering. Our parts specialists are available to verify fitment — order with confidence and get back up and running today.