OEM Carrier Condenser Fan Motor for Model CA16NW03000GAAAA

This is the factory-specified OEM condenser fan motor for the Carrier CA16NW03000GAAAA split-system air conditioner. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to dissipate heat from the refrigerant. When this motor fails, the compressor overheats and trips on high-pressure lockout — leaving you with a system that runs briefly then shuts off, or won't cool at all. Replaces OEM part numbers HC34GE239 and HB33GR236.

• Specs: OEM-matched horsepower (1/4–1/3 HP) | 208–230V single-phase | Factory-correct RPM, rotation direction, and shaft diameter | Thermally protected | Permanent split capacitor (PSC) design — verify run capacitor MFD on your unit's data plate before replacing motor
• OEM vs Generic: OEM motors (HC34GE239 / HB33GR236) are wound to exact Carrier factory tolerances for RPM and amperage draw. Aftermarket motors frequently run hotter, draw higher amps, and void remaining equipment warranties — especially critical on high-efficiency units like the CA16NW series.
• Install difficulty: 3/5 — Disconnect power and discharge run capacitor before beginning. Tools needed: 1/4" and 5/16" nut drivers, blade screwdriver, needle-nose pliers, multimeter. Photograph all wiring connections and note blade pitch and rotation direction before removal. Torque mounting bolts evenly to prevent motor housing vibration.
• Warranty: 1-year OEM factory warranty against defects. Orders placed before 3 PM ship same business day from our climate-controlled parts warehouse.

Compatibility: Designed for the Carrier CA16NW03000GAAAA 16 SEER single-stage R-410A split-system condenser. Cross-references OEM part numbers HC34GE239 and HB33GR236. Always confirm HP, voltage, RPM, rotation, and shaft diameter against your unit's data plate before ordering. Our parts specialists are available to verify fitment — reach out before you buy if you have any questions.