OEM Carrier 2-Pole Contactor 24V Coil for Model CA15NA03000GAAAA
This is the factory OEM replacement contactor for the Carrier CA15NA03000GAAAA split-system air conditioner, sold under OEM part number HN51KC024. The contactor is the high-voltage relay that receives a 24V signal from your thermostat and closes the circuit to power the compressor and condenser fan motor. When the contactor fails — whether from pitted contacts, a burned coil, or a stuck plunger — the result is an AC unit that hums but won't start, trips the breaker, or simply does nothing when the thermostat calls for cooling.
-
Specs: 2-Pole configuration | 24V AC coil voltage | 30–40 amp contact rating | Replaces OEM part number HN51KC024 | Factory-matched contact material and coil resistance
-
OEM vs Generic: OEM contactors use factory-spec silver-alloy contact tips and precision-wound coils that meet Carrier's exact pull-in and drop-out voltage tolerances. Generic contactors often use lower-grade contact materials that pit and arc more rapidly, leading to premature failure and potential compressor damage.
-
Install difficulty: 2/5 — Always disconnect power at the breaker and verify zero voltage with a multimeter before proceeding. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, needle-nose pliers, multimeter. Photograph all wire connections before removing the old contactor. Note: contacts carry line voltage — exercise caution.
-
Warranty: 1-year OEM factory warranty against defects. Orders placed before 3PM ship same business day from our climate-controlled warehouse.
Compatibility: Designed and factory-specified for the Carrier CA15NA03000GAAAA single-stage split-system condenser. Always confirm coil voltage and pole configuration on your unit's data plate before ordering. Our HVAC parts specialists are available to verify fitment before you purchase — no guesswork, no returns.