OEM Carrier 2-Pole Contactor 24V Coil for Model C50A302062

This is the factory-specified OEM replacement contactor for the Carrier C50A302062 packaged unit, supplied under part numbers HN53CB115 and HN53CD115. The contactor is a high-voltage relay that switches line-voltage power to the compressor and condenser fan motor when the 24V control circuit signals a call for cooling. When the contactor fails — due to pitted contacts, a burned coil, or contacts that weld shut — you'll typically experience an AC that won't turn on at all, a compressor that won't energize despite the thermostat calling for cooling, or conversely, a system that runs continuously and won't shut off.

• Specs: 2-pole configuration | 24V AC coil voltage | Rated for high-amperage compressor loads | Direct OEM replacement matching factory contact material and coil pull-in voltage — replaces HN53CB115 and HN53CD115
• OEM vs Generic: OEM contactors use factory-spec silver-alloy contact tips rated for the exact inrush current of the C50A302062 compressor. Generic contactors often use lower-grade contacts that pit and arc faster, leading to repeat failures within one to two seasons.
• Install difficulty: 2/5 — Disconnect and lock out power before beginning. Tools needed: 1/4" and 5/16" nut drivers, flathead screwdriver, multimeter for coil and contact verification. Photograph all wiring connections before removal. Always confirm contacts are open before re-energizing the unit.
• Warranty: 1-year OEM factory warranty. Orders placed by 3PM local time ship same business day from our climate-controlled HVAC parts warehouse.

Compatibility: Designed as a direct OEM replacement for the Carrier C50A302062 packaged unit. Verify pole count, coil voltage, and amperage rating on your existing contactor's data label before ordering to confirm fitment. If you have any questions about compatibility, our HVAC parts specialists verify fitment before you order — no guesswork required.