OEM Carrier 2-Pole Contactor 24V Coil for Model C4850C50AJ03661
This OEM contactor (part number HN53CB115) is the factory-specified high-voltage relay for the Carrier C4850C50AJ03661 packaged unit. The contactor acts as the main electrical switch that energizes the compressor and condenser fan motor when your thermostat calls for cooling. When the contactor fails — due to pitted contacts, a burned coil, or stuck plunger — the unit will either refuse to start, run continuously without cycling off, or trip the breaker repeatedly. Replacing it is one of the most common and cost-effective AC repairs available.
-
Specs: 2-Pole configuration | 24V AC coil voltage | Factory-rated amperage for Carrier C4850C50AJ03661 | OEM part number HN53CB115 | Built to Carrier factory tolerances for reliable switching under high-load conditions
-
OEM vs Generic: This is a genuine OEM Carrier contactor. OEM units feature contact surfaces rated to exact amperage specifications, preventing premature pitting and arcing that plague lower-quality generic replacements — protecting your compressor investment.
-
Install difficulty: 2/5 — Shut off power at the disconnect box and verify zero voltage with a multimeter before touching any terminals. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, multimeter, needle-nose pliers. Photograph all wire positions before removal. The contactor slides out of the control panel and wires transfer one at a time.
-
Warranty: 1-year OEM factory warranty against defects in materials and workmanship. In-stock and ships same business day from our warehouse.
Compatibility: Engineered specifically for the Carrier C4850C50AJ03661 packaged unit. Always confirm coil voltage and pole configuration on your unit's data plate before ordering. Our HVAC parts specialists are available to verify fitment — order with confidence and get your system back online fast.