OEM Carrier 2-Pole 30 Amp 120V Contactor HN52KC052 for Model 09DE109600

This genuine OEM contactor is the factory-specified replacement for Carrier model 09DE109600 HVAC equipment. The contactor acts as the high-voltage relay that connects and disconnects power to critical system loads — including the compressor and condenser fan motor — each time your system cycles on or off. When the 120V coil is energized by the control circuit, the contactor closes and allows line voltage to flow to downstream components. A failing contactor is one of the most common HVAC service calls: symptoms include the system not turning on at all, audible chattering or humming from the electrical panel, the unit running continuously and failing to shut off, or visible pitting and burning on the contact surfaces.

• Specs: 2-Pole | 30 Amp (FLA) | 120V AC Coil | 50/60 Hz | OEM Part# HN52KC052 (cross-ref: 3100-20T628)
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part, manufactured to exact OEM tolerances. Generic contactors often use inferior contact materials that pit and weld faster under load, leading to premature failure and potential compressor damage.
• Install Difficulty: 2/5 — Shut off power at both the disconnect and breaker before beginning. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter. Photograph all wiring connections before removing the old contactor. Discharge any capacitors in the cabinet before working nearby.
• Warranty: 1-year OEM factory warranty. In-stock units ship same business day from our warehouse.

Compatibility: Designed for Carrier model 09DE109600 HVAC equipment. Verify your unit's coil voltage (120V) and pole/amp configuration against your existing contactor's data label before ordering. Our fitment team is available to confirm compatibility before you buy — just reach out before placing your order.