OEM Carrier 3-Pole Contactor 60A 208-240V Coil (HN53HF212) for Model 06EW044950

The Carrier HN53HF212 is the factory OEM 3-pole contactor for the Carrier 06EW044950 commercial scroll compressor unit. The contactor is the high-voltage relay that receives a 24V signal from the control circuit and closes the high-power circuit to energize the compressor and associated loads. When a contactor fails — due to pitted contacts, a burned coil, or welded poles — the system will either refuse to start, fail to energize the compressor, trip breakers repeatedly, or run continuously without shutting off. Replacing with a genuine OEM part ensures exact coil pull-in voltage, correct contact gap geometry, and rated load performance from day one.

• Specs: 3-Pole | 60A FLA (Full Load Amps) | 208-240V coil voltage | Factory OEM part number HN53HF212 | Weight approx. 1.45–2.0 lbs
• OEM vs Generic: OEM Carrier contactors are wound and rated to exact factory tolerances for coil pull-in voltage and contact surface area. Generic contactors may use thinner contact material, leading to premature pitting, arcing, and welded contacts — especially under the high-inrush loads of commercial scroll compressors.
• Install Difficulty: 3/5 — This is a commercial-grade 3-pole contactor carrying up to 60A. Always disconnect and lock out power at the disconnect box before servicing. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, wire labels or camera for documenting terminal positions, torque screwdriver for terminal lugs. Verify coil voltage on the old contactor before installing.
• Warranty: 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Designed for the Carrier 06EW044950 commercial HVAC application. Always verify pole count (3-pole), amperage (60A FLA), and coil voltage (208-240V) against your unit's wiring diagram and data plate before ordering. Our technical team is available to confirm fitment — contact us before you order if you have any questions.