OEM Carrier 3-Pole Contactor 60A 120V Coil for Model 06EW044660

This is the genuine OEM Carrier contactor (part number HN53HF122), the factory-specified replacement for the Carrier 06EW044660 commercial refrigeration or chiller compressor unit. The contactor is a high-voltage relay that closes the circuit to energize the compressor and associated load motors on command from the 120V control circuit. When a contactor fails — due to worn or pitted contacts, coil burnout, or welded contacts — the compressor will not energize, the unit will fail to start, or it may run continuously without cycling off.

• Specs: 3-pole configuration | 60A FLA (75A res) motor rating | 120V AC coil voltage | Heavy-duty contact design rated for demanding commercial duty cycles | Weight: 0.89 lbs
• OEM vs Generic: This is a genuine Carrier OEM part, equivalent to Siemens 42EF35AFAKA. OEM contactors maintain factory-spec contact gap and coil pull-in voltage tolerances. Generic contactors may exhibit premature contact pitting and reduced coil life under high-cycle commercial loads.
• Install difficulty: 3/5 — Requires full system lockout/tagout before servicing. Tools needed: insulated screwdrivers, multimeter, wire labels/camera for documentation. Verify coil voltage and pole count on your existing unit before installation. Recommend a licensed commercial HVAC/R technician for this repair.
• Warranty: 90-day OEM manufacturer warranty. Ships same business day from our warehouse. Cross-references: 43-040-131, HN53HE122, 43-040-130, HN53HF120, HN53LF212, HN53LE226.

Compatibility: Designed for the Carrier 06EW044660 commercial compressor/chiller application. Confirm coil voltage (120V AC), pole count (3-pole), and amperage rating against your unit's data plate and wiring diagram before ordering. Our parts specialists can verify fitment — contact us before you order if unsure.