OEM Carrier 3-Pole Contactor 60 Amp 120V Coil for Model 06EW033510

This is the genuine OEM Carrier contactor (part number HN53HF122), the factory-specified replacement for the Carrier 06EW033510 commercial chiller and applied HVAC equipment. The contactor is a high-voltage switching relay that energizes and de-energizes the compressor and motor circuits under command from the control board. When a contactor fails, symptoms typically include the system completely failing to start, burned or pitted contact surfaces causing intermittent operation, chattering or audible buzzing under load, or visible arc damage to the contact tips — all of which result in loss of cooling or heating capacity.

• Specs: 60A full-load amperage | 120V AC coil voltage | 3-pole contact configuration | AC coil type | Weight: 0.89 lbs | OEM Part Number: HN53HF122
• OEM vs Generic: This is a genuine Carrier OEM contactor, manufactured to exact factory tolerances for contact gap, coil pull-in voltage, and arc suppression. Generic aftermarket contactors frequently use lower-grade contact alloys that pit and fail prematurely under high-cycle commercial loads — risking compressor damage far more costly than the part itself.
• Install difficulty: 3/5 — Commercial-grade equipment; always shut off all upstream disconnect switches and verify zero voltage with a meter before touching terminals. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter, wire labels or camera for documentation. This work should be performed by a licensed HVAC/R technician.
• Warranty: 90-day OEM manufacturer warranty. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Designed for the Carrier 06EW033510 commercial HVAC platform. Verify coil voltage (120V), pole count (3-pole), and amperage rating against your unit's nameplate data before ordering. Our technical team is available to confirm fitment — contact us before you order if you have any questions.