OEM Carrier 3-Pole Contactor 60A 115V Coil — Model 06EV027500 (HN53HF115)

This OEM contactor is the factory-specified replacement for the Carrier 06EV027500 commercial reciprocating compressor unit. The contactor is the high-voltage switching relay that closes when the control board sends a 115V signal, allowing line-voltage power to energize the compressor motor. When a contactor fails — due to worn contacts, coil burnout, or pitted contact faces — the compressor will not start, the system will fail to cool or heat, and you may hear a buzzing or chattering noise at the unit. In severe cases, burned contacts cause a hard no-power condition with no audible warning at all.

• Specs: 3-Pole | 60 Amp FLA | 115V AC Coil | 50/60 Hz | OEM Part Number HN53HF115 | Replaces: HN53AF101, HN53AE101, HN53LE200, HN53AE103, HN53LF200, HN53AF103, HN53LF205, HN53LF226
• OEM vs Generic: OEM contactors are manufactured to exact Carrier electrical and mechanical tolerances. Generic contactors frequently use lower-grade contact alloys that pit and weld faster under the high inrush current of commercial compressor loads, leading to repeat failures and potential compressor damage.
• Install difficulty: 3/5 — Commercial-rated contactor; always lock out/tag out (LOTO) before servicing. Tools needed: insulated screwdrivers, needle-nose pliers, multimeter, torque-rated terminal driver. Photograph all wiring connections before removal. Verify coil voltage and pole count match before energizing.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed for Carrier 06EV027500 commercial reciprocating compressor units. Also fits a wide range of 06EV, 06EW, 07EB, 07ED, and 30GA series Carrier, Bryant, and Payne equipment that specifies a 3-pole, 60A, 115V coil contactor. Always verify your unit's data plate coil voltage, amperage, and pole configuration before ordering. Our parts specialists are available to confirm fitment prior to purchase.