What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model T9MPV075F12B1 — HSP Silicon Nitride | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T9MPV075F12B1 — HSP Silicon Nitride | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter/Sensor for T9MPV075F12B1 — HSP Silicon Nitride | Ships Today

Name: Tempstar Hot Surface Igniter/Sensor for T9MPV075F12B1 — HSP Silicon Nitride | Ships Today
Brand: Tempstar
SKU: 1009524-GEN
Price: 38.95 USD
Availability: InStock

SKU: 1009524-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM hot surface igniter/sensor (HSP, Part Number 1009524) for the Tempstar T9MPV075F12B1 gas furnace. This combination silicon-nitride igniter both lights the burner and serves as the flame-sensing element for the ignition sequence. Silicon-nitride (SK-style) elements are more rugged than legacy silicon-carbide igniters, but they still wear out after repeated thermal cycling and contamination. When the part fails, the furnace either fails to ignite at all or lights briefly and then drops out on flame failure, because the board can no longer prove flame. Symptoms include short-cycling on ignition, repeated lockouts, and no heat. Handle the new element by its base only — oils and dirt on the igniter/sensor surface degrade both ignition and flame sensing. This OEM HSP restores correct ignition and flame-proving on the first cycle.

Specifications

Spec	Value
Part Number	1009524
Type	Hot Surface Igniter/Sensor (HSP, Silicon Nitride)
Brand	Tempstar (ICP / Heil)
Function	Burner Ignition & Flame Sensing
Fits Model	T9MPV075F12B1

Compatibility

Designed for the Tempstar T9MPV075F12B1 furnace and the matching ICP/Heil/Comfortmaker 9-series variable-speed furnaces that use the 1009524 HSP igniter/sensor. Confirm your furnace uses a combination igniter/sensor (not a separate igniter and flame rod) before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter and shut off the gas supply.
Access — Remove the burner/control compartment door.
Document — Photograph the igniter/sensor wiring and its position in the burner flame path before removing.
Remove — Unplug the connector, remove the mounting screw(s), and withdraw the old element without touching its surface.
Install — Mount the new HSP igniter/sensor handling it only by the base, set it in the correct flame-path position, and reconnect the harness.
Test — Restore gas and power, then run a full heat cycle to confirm ignition and stable flame-proving with no lockout.

Signs You Need a Replacement

Burner lights then shuts off on flame failure (short ignition cycle).
No ignition at all with repeated lockouts.
Visible crack, erosion, or heavy oxidation on the element.
Control board reports ignition or flame-sense fault codes.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter/Sen...

$38.95

Frequently Asked Questions

Does this Igniter fit my Tempstar T9MPV075F12B1 — HSP Silicon Nitride | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar T9MPV075F12B1 — HSP Silicon Nitride | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar T9MPV075F12B1 — HSP Silicon Nitride | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu