What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model T9MPV050F12A2 — HSP Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T9MPV050F12A2 — HSP Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter/Sensor for T9MPV050F12A2 — HSP Kit | Ships Today

Name: Tempstar Hot Surface Igniter/Sensor for T9MPV050F12A2 — HSP Kit | Ships Today
Brand: Tempstar
SKU: 1009524-GEN
Price: 39.00 USD
Availability: InStock

SKU: 1009524-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM hot surface igniter/sensor kit (part number 1009524) for the Tempstar T9MPV050F12A2 variable-speed gas furnace. The hot surface igniter (HSP) glows red-hot when the furnace control energizes it, igniting the gas at the burners on each call for heat, and the integrated sensing element confirms flame so the control keeps the gas valve open. Modern silicon-style HSI elements are more durable than legacy carbide igniters but still degrade with thermal cycling. Typical failure symptoms include the furnace failing to light, the igniter not glowing, repeated ignition lockouts, or short-cycling where the burners light briefly then shut down on a failed flame sense.

Specifications

Spec	Value
Part Number	1009524
Description	Igniter/Sensor HSP Kit
Type	Hot Surface Igniter / Sensor
Brand	Tempstar (ICP / Heil)
Function	Burner Ignition + Flame Sense
Application	Gas Furnace
Fit	OEM Replacement

Compatibility

Direct OEM replacement for the Tempstar T9MPV050F12A2 variable-speed gas furnace and shared across ICP-family equipment (Tempstar, Heil, Comfortmaker, and related Carrier/ICP platforms). Confirm part number 1009524 and the igniter mounting style against your existing unit before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker and shut off the gas; verify zero voltage with a multimeter before proceeding.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position, bracket orientation, and wiring connector before disconnecting.
Remove — Unplug the igniter harness and remove the mounting screw(s), then carefully withdraw the old igniter without touching the ceramic element.
Install — Mount the new igniter handling it only by the ceramic base, set the correct position relative to the burner, and reconnect the harness per your photos.
Test — Restore gas and power, start a heat call, and confirm the igniter glows, the burners light, and the flame stays lit through a full cycle.

Signs You Need a Replacement

Furnace will not light and the igniter does not glow
Repeated ignition lockouts after several failed attempts
Burners light briefly then shut off on failed flame sense
Visible cracks or hot spots on the igniter element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter/Sen...

$39.00

Frequently Asked Questions

Does this Igniter fit my Tempstar T9MPV050F12A2 — HSP Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar T9MPV050F12A2 — HSP Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar T9MPV050F12A2 — HSP Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu