What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model T9MPD050F12B1 — HSP SK | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T9MPD050F12B1 — HSP SK | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter/Sensor for T9MPD050F12B1 — HSP SK | Ships Today

Name: Tempstar Hot Surface Igniter/Sensor for T9MPD050F12B1 — HSP SK | Ships Today
Brand: Tempstar
SKU: 1009524-GEN
Price: 44.00 USD
Availability: InStock

SKU: 1009524-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM hot surface igniter/sensor (HSP SK, part number 1009524) for the Tempstar T9MPD050F12B1 furnace. This combination silicon-element component both ignites the gas at the burners and senses the resulting flame, confirming to the control board that ignition succeeded. The rugged hot-surface element is more durable than legacy carbide igniters but still degrades with thermal cycling over time. When it fails, the furnace will either fail to light entirely or light briefly and then shut down when the board cannot confirm a flame, dropping into lockout. Typical symptoms include short-cycling on heat calls, repeated ignition lockouts, an igniter that no longer glows, and a sooty or corroded sensing tip. Handle the element only by its base, as oils and grit reduce its sensing reliability.

Specifications

Spec	Value
Part Number	1009524
Type	Hot Surface Igniter/Sensor (HSP SK)
Brand	Tempstar
Function	Ignition + Flame Sensing
Fits Model	T9MPD050F12B1

Compatibility

Direct-fit replacement igniter/sensor for the Tempstar T9MPD050F12B1 gas furnace. The same HSP SK component is shared across many ICP-built Tempstar, Heil, and Comfortmaker furnaces using integrated igniter/sensing ignition. Confirm your existing part matches OEM 1009524 before ordering.

Installation Guide

Safety First — Disconnect power, verify zero voltage with multimeter.
Access — Remove service panel.
Document — Photo all wires before disconnecting.
Remove — Unplug the igniter/sensor harness, remove the mounting screw, and withdraw the old element from the burner without forcing it.
Install — Mount the new igniter/sensor handling it only by its base, secure the screw, and reconnect the harness per your photo.
Test — Restore power, call for heat, and confirm the element glows, lights the burners, and the furnace stays running without lockout.

Signs You Need a Replacement

Furnace lights briefly then shuts down on flame-sense failure
Igniter no longer glows during a heat call
Repeated ignition lockouts or short-cycling on heat
Cracked element or sooty, corroded sensing tip

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter/Sen...

$44.00

Frequently Asked Questions

Does this Igniter fit my Tempstar T9MPD050F12B1 — HSP SK | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar T9MPD050F12B1 — HSP SK | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar T9MPD050F12B1 — HSP SK | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu