What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model T8DNL125L20A1 — Silicon Nitride | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T8DNL125L20A1 — Silicon Nitride | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter/Sensor for T8DNL125L20A1 — Silicon Nitride | Ships Today

Name: Tempstar Hot Surface Igniter/Sensor for T8DNL125L20A1 — Silicon Nitride | Ships Today
Brand: Tempstar
SKU: 1009524-GEN
Price: 43.00 USD
Availability: InStock

SKU: 1009524-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter/sensor, Tempstar part number 1009524, is the silicon-nitride HSP ignition component for the T8DNL125L20A1 gas furnace. Unlike older glow-bar igniters, the silicon-nitride design both ignites the burners and serves as part of the flame-proving circuit — making it tougher and more thermal-shock resistant, but still a leading furnace failure point. When it cracks or degrades, the furnace will run the inducer and blower but fail to light, or light and then lock out when flame is not confirmed.

Specifications

Spec	Value
OEM Part Number	1009524
Type	Hot Surface Igniter/Sensor (HSP)
Brand	Tempstar / Heil / ICP
Element	Silicon Nitride
Voltage	120V
Application	Gas Furnace Burner Ignition

Compatibility

Direct-fit replacement for the Tempstar T8DNL125L20A1 furnace and many related ICP-family models (Heil, Comfortmaker, Arcoaire) that use the 1009524 silicon-nitride igniter/sensor kit. Verify your existing igniter part number and connector style before ordering.

Installation Guide

Safety First — Shut off the gas and disconnect electrical power at the furnace switch and breaker. Verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter connector, routing, and mounting position before disconnecting.
Remove — Unplug the harness, remove the mounting screw, and withdraw the old igniter. Handle only by the ceramic base — never touch the element.
Install — Seat the new igniter/sensor in the same position, secure the screw, and reconnect the harness per your photo.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows, the burners light, and flame is proven without lockout.

Signs You Need a Replacement

Inducer and blower run but the furnace never lights.
Furnace lights briefly, then shuts down (flame not proven).
Visible crack, chip, or white discoloration on the element.
Furnace locks out after repeated ignition attempts.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter/Sen...

$43.00

Frequently Asked Questions

Does this Igniter fit my Tempstar T8DNL125L20A1 — Silicon Nitride | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar T8DNL125L20A1 — Silicon Nitride | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar T8DNL125L20A1 — Silicon Nitride | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu