What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model T9UHX060F12A1 — OEM HSI Ignition Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T9UHX060F12A1 — OEM HSI Ignition Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter & Gas Valve for T9UHX060F12A1 — OEM HSI Ignition Kit | Ships Today

Name: Tempstar Hot Surface Igniter & Gas Valve for T9UHX060F12A1 — OEM HSI Ignition Kit | Ships Today
Brand: Tempstar
SKU: 1172533-GEN
Price: 46.95 USD
Availability: InStock

SKU: 1172533-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ignition package for the Tempstar T9UHX060F12A1 gas furnace pairs the genuine hot surface igniter (HSI, ICP/Tempstar part #1172533) with the matching Honeywell VR8205S snap-mount gas valve (part #1172821). The hot surface igniter is a silicon-nitride/carbide element that glows red-hot on a call for heat to light the burners, while the VR8205S gas valve meters and controls fuel delivery. The HSI is one of the most common furnace wear items — repeated heat cycling makes the element brittle until it cracks and fails to glow, leaving you with no ignition and no heat. A failed gas valve causes no gas flow or erratic burner behavior. This kit restores reliable, safe ignition.

Specifications

Spec	Value
Igniter Part Number	1172533
Gas Valve Part Number	1172821 (Honeywell VR8205S)
Igniter Type	Hot Surface Igniter (HSI)
Voltage	120V
Valve Type	Snap-Mount, Single-Stage
Brand	Tempstar / ICP / Heil
Fit	OEM Direct Replacement

Compatibility

Designed for the Tempstar T9UHX060F12A1 gas furnace and ICP-family units (Tempstar, Heil, Comfortmaker, Arcoaire) using the 120V hot surface igniter and Honeywell VR8205S gas valve. Confirm your furnace uses an HSI (not a spark or standing-pilot) ignition system before ordering.

Installation Guide

Safety First — Shut off the gas supply, disconnect electrical power at the switch and breaker, and verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter mounting, gas valve wiring, and gas line connections before disconnecting.
Remove — Unscrew the brittle igniter (handle only by its ceramic base, never the element) and, if replacing the valve, disconnect the wiring and gas piping from the old VR8205S.
Install — Mount the new igniter and gas valve, reconnect wiring per your photo, and seal gas connections with approved pipe dope.
Test — Restore gas and power, run a heat cycle, watch the igniter glow and burners light, and leak-check every gas joint with soap solution.

Signs You Need a Replacement

Igniter does not glow on a call for heat — no ignition, no heat
Visible cracks or breaks in the igniter element
Furnace locks out after several failed ignition attempts
Burners fail to light or gas valve does not open/click

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter & G...

$46.95

Frequently Asked Questions

Does this Igniter fit my Tempstar T9UHX060F12A1 — OEM HSI Ignition Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar T9UHX060F12A1 — OEM HSI Ignition Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar T9UHX060F12A1 — OEM HSI Ignition Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu