What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model TNE100F14G1 — Silicon Nitride OEM 1009524 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number TNE100F14G1 — Silicon Nitride OEM 1009524 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter for TNE100F14G1 — Silicon Nitride OEM 1009524 | Ships Today

Name: Tempstar Hot Surface Igniter for TNE100F14G1 — Silicon Nitride OEM 1009524 | Ships Today
Brand: Tempstar
SKU: 1009524-GEN
Price: 36.95 USD
Availability: InStock

SKU: 1009524-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part number 1009524) is the ignition and flame-sensing component for the Tempstar TNE100F14G1 gas furnace. On a call for heat, the furnace control energizes the igniter, which heats to a glowing surface temperature and lights the burner gas. This silicon-nitride-style igniter/sensor is rugged and resistant to the thermal cycling and contamination that crack older silicon carbide elements. When an igniter fails, the furnace will typically try to light several times and then lock out, leaving you with no heat, repeated clicking, or a flashing diagnostic code on the control board. Cracks, white residue, or visible breaks in the element are sure signs of failure.

Specifications

Spec	Value
Part Number	1009524
Type	Hot Surface Igniter / Sensor (HSP SK)
Brand	Tempstar (ICP / Heil)
Function	Ignition and flame sensing
Fitment	OEM direct replacement
Application	Gas furnace burner ignition

Compatibility

Direct OEM replacement for the Tempstar TNE100F14G1 furnace. This igniter is shared across many ICP-family units (Tempstar, Heil, Comfortmaker, Arcoaire) that use OEM part 1009524. Always confirm your existing part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then shut off the gas. Verify zero voltage with a multimeter.
Access — Remove the furnace blower/burner service panel.
Document — Photograph the igniter bracket and wiring before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the old igniter without touching the element.
Install — Mount the new igniter, handling it only by the ceramic base, and reconnect the harness per your photo.
Test — Restore gas and power, then run a heat cycle and confirm the igniter glows and the burner lights.

Signs You Need a Replacement

Furnace clicks and attempts ignition but never lights
Control board lockout or flashing igniter fault code
Visible crack, break, or white blistering on the igniter element
No glow visible through the inspection port during a heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter for...

$36.95

Frequently Asked Questions

Does this Igniter fit my Tempstar TNE100F14G1 — Silicon Nitride OEM 1009524 | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar TNE100F14G1 — Silicon Nitride OEM 1009524 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar TNE100F14G1 — Silicon Nitride OEM 1009524 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu