What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model TNE075F14G1 — Silicon Nitride HSI Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number TNE075F14G1 — Silicon Nitride HSI Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter for TNE075F14G1 — Silicon Nitride HSI Kit | Ships Today

Name: Tempstar Hot Surface Igniter for TNE075F14G1 — Silicon Nitride HSI Kit | Ships Today
Brand: Tempstar
SKU: 1009524-GEN
Price: 39.95 USD
Availability: InStock

SKU: 1009524-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter and sensor kit (part number 1009524, HSP SK) is the ignition component for the Tempstar TNE075F14G1 gas furnace. On a call for heat, 120V is applied to the igniter, which glows red-hot and ignites the gas at the burners; the same silicon nitride element also provides flame proving. A failed igniter is among the most common no-heat causes — repeated thermal cycling makes the element brittle until it cracks and the furnace can no longer light. Silicon nitride HSI construction resists the thermal shock that breaks older silicon carbide igniters, giving longer life and dependable cold-weather starts.

Specifications

Spec	Value
Part Number	1009524
Type	Hot Surface Igniter / Sensor (HSI)
Element	Silicon Nitride
Brand	Tempstar (ICP / Heil)
Voltage	120V
Application	Gas furnace ignition
Fitment	OEM replacement

Compatibility

Direct replacement for the Tempstar TNE075F14G1 and other ICP-family gas furnaces (Tempstar, Heil, Comfortmaker, Arcoair) using the 1009524 hot surface igniter/sensor. Verify your furnace uses a 120V silicon nitride HSI before ordering.

Installation Guide

Safety First — Shut off gas and disconnect electrical power, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photo the igniter bracket position and the wire harness routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw(s), and withdraw the old igniter without touching the ceramic element.
Install — Mount the new igniter by the bracket only (never handle the silicon nitride element with bare fingers), align it to the burner, and reconnect the harness per your photo.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace blows cold air or locks out on ignition failure
Igniter does not glow when commanded on
Visible crack, chip, or burn spot on the element
Repeated short-cycling on flame-proving faults

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter for...

$39.95

Frequently Asked Questions

Does this Igniter fit my Tempstar TNE075F14G1 — Silicon Nitride HSI Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar TNE075F14G1 — Silicon Nitride HSI Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar TNE075F14G1 — Silicon Nitride HSI Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu