What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model TDE075B12B2 — Igniter/Sensor HSP SK | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number TDE075B12B2 — Igniter/Sensor HSP SK | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter for TDE075B12B2 — Igniter/Sensor HSP SK | Ships Today

Name: Tempstar Hot Surface Igniter for TDE075B12B2 — Igniter/Sensor HSP SK | Ships Today
Brand: Tempstar
SKU: 1009524-GEN
Price: 42.00 USD
Availability: InStock

SKU: 1009524-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter/sensor (HSP SK, part number 1009524) is the ignition component for the Tempstar TDE075B12B2 gas furnace. The element glows red-hot on a call for heat to light the burners, and the kit also handles flame sensing so the control board can confirm a flame and keep the gas valve open. A worn or cracked igniter is one of the most common no-heat faults: the burners never light, or the furnace locks out after several failed tries. The silicon igniter element degrades with every heating cycle and eventually cracks or stops glowing.

Specifications

Spec	Value
Part Number	1009524
Type	Hot Surface Igniter / Sensor (HSP SK Kit)
Brand	Tempstar (ICP / Heil)
Function	Ignition + Flame Sensing
Application	Gas Furnace
Fitment	OEM Replacement

Compatibility

Direct-fit OEM replacement for the Tempstar TDE075B12B2 furnace. ICP builds Tempstar, Heil, and Comfortmaker furnaces on shared platforms, so this igniter/sensor assembly fits many equivalent ICP-family models that specify part 1009524. Confirm against your unit's parts list before ordering.

Installation Guide

Safety First — Shut off gas and disconnect electrical power. Verify zero voltage at the furnace with a multimeter.
Access — Remove the furnace blower-compartment service panel to reach the burner assembly.
Document — Photograph the igniter mounting position and wiring connector before removal.
Remove — Unplug the igniter connector, remove the mounting screw(s), and handle the old igniter only by its ceramic base.
Install — Mount the new igniter/sensor in the same orientation without touching the silicon element, secure the screw, and reconnect the plug.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows, burners light cleanly, and the flame holds without lockout.

Signs You Need a Replacement

Furnace attempts to start but burners never light
Igniter no longer glows or glows dim/uneven
Furnace lights then shuts down on flame-sense failure
Visible cracks, blistering, or white deposits on the igniter element

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter for...

$42.00

Frequently Asked Questions

Does this Igniter fit my Tempstar TDE075B12B2 — Igniter/Sensor HSP SK | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar TDE075B12B2 — Igniter/Sensor HSP SK | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar TDE075B12B2 — Igniter/Sensor HSP SK | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu