What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model T9MPV100J20D1 — HSI Replacement | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T9MPV100J20D1 — HSI Replacement | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter for T9MPV100J20D1 — HSI Replacement | Ships Today

Name: Tempstar Hot Surface Igniter for T9MPV100J20D1 — HSI Replacement | Ships Today
Brand: Tempstar
SKU: 1172533-GEN
Price: 33.95 USD
Availability: InStock

SKU: 1172533-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part number 1172533, "IGNITOR HSI") is the ignition component for the Tempstar T9MPV100J20D1 two-stage gas furnace. The hot surface igniter glows red-hot at the start of each heating cycle to light the burner gas. On this two-stage platform the igniter works in concert with the Honeywell VR8205Q 2-stage gas valve (related OEM part 1172822, "VALVE N&L HSI 2STG HW VR8205Q"). A cracked or worn igniter is one of the most common causes of a no-heat furnace — the inducer runs, the gas valve is commanded open, but with no glowing igniter the burners never light and the board locks out.

Specifications

Spec	Value
Part Number	1172533
Type	Hot Surface Igniter (HSI)
Brand	Tempstar (ICP / Heil family)
Voltage	120V
Related Gas Valve	1172822 — Honeywell VR8205Q 2-stage
Fit	OEM direct replacement

Compatibility

Direct-fit replacement igniter for the Tempstar T9MPV100J20D1 two-stage gas furnace and its ICP/Heil/Comfortmaker siblings on the same platform. These models pair the HSI with the Honeywell VR8205Q 2-stage gas valve. Verify your old igniter matches 1172533 before installing.

Installation Guide

Safety First — Turn off power at the disconnect and breaker, verify zero voltage at the board with a multimeter, and shut off the gas supply.
Access — Remove the lower burner-compartment service panel.
Document — Photograph the igniter bracket position, depth, and wiring before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and lift out the old igniter — handle the new element by its ceramic base only, never the hot surface.
Install — Seat the new igniter at the proper burner-port depth, fasten the bracket, and reconnect the harness as photographed.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows, both stages light cleanly, and no flame-failure lockout occurs.

Signs You Need a Replacement

Inducer and blower run but burners never ignite (no heat).
Visible cracks, breaks, or hot spots on the igniter element.
Igniter fails to glow during the ignition sequence.
Repeated ignition-failure lockout codes on the control board.

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter for...

$33.95

Frequently Asked Questions

Does this Igniter fit my Tempstar T9MPV100J20D1 — HSI Replacement | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar T9MPV100J20D1 — HSI Replacement | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar T9MPV100J20D1 — HSI Replacement | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu