What igniter fits my Tempstar furnace?

The correct replacement for Tempstar model T8MPT100J20B1 - Silicon Nitride HSI | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T8MPT100J20B1 - Silicon Nitride HSI | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Hot Surface Igniter for T8MPT100J20B1 - Silicon Nitride HSI | Ships Today

Name: Tempstar Hot Surface Igniter for T8MPT100J20B1 - Silicon Nitride HSI | Ships Today
Brand: Tempstar
SKU: 1172533-GEN
Price: 38.00 USD
Availability: InStock

SKU: 1172533-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) is the exact ignition component for the Tempstar T8MPT100J20B1 two-stage gas furnace. The igniter (Tempstar part 1172533) glows red-hot when the gas valve opens, lighting the burner gas at the start of every heat cycle. Built from durable igniter material rated for thousands of cycles, it is the single most common furnace failure point. When an igniter cracks or burns out, the furnace draws air, runs the inducer, but never lights — leaving you with no heat and often a flashing fault code on the control board. Replacing the igniter restores reliable, fast ignition.

Specifications

Spec	Value
OEM Part Number	1172533 (IGNITOR HSI)
Type	Hot Surface Igniter (HSI)
Brand	Tempstar
Fits Model	T8MPT100J20B1
Application	Gas Furnace Ignition
Fit Type	OEM Direct Replacement

Compatibility

Engineered as a direct-fit replacement for the Tempstar T8MPT100J20B1 100,000 BTU two-stage furnace and equivalent Heil/ICP family models that share the same OEM igniter assembly. Always confirm your existing igniter part number before ordering.

Installation Guide

Safety First - Shut off gas and disconnect power at the furnace switch; verify zero voltage with a multimeter.
Access - Remove the lower burner-compartment service panel.
Document - Photograph the igniter bracket and wire routing before disconnecting.
Remove - Unplug the igniter harness connector and remove the mounting screw; lift the fragile element out without touching the ceramic.
Install - Mount the new igniter, handling only the ceramic base, and reconnect the harness per your photo.
Test - Restore gas and power, then run a heat cycle and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace inducer and blower run but burners never ignite.
Visible crack, blister, or break in the igniter element.
Igniter no longer glows during a call for heat.
Control board flashes an ignition-failure or lockout fault code.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Hot Surface Igniter for...

$38.00

Frequently Asked Questions

Does this Igniter fit my Tempstar T8MPT100J20B1 - Silicon Nitride HSI | Ships Today?

Yes. This is the factory-specified OEM igniter for the Tempstar T8MPT100J20B1 - Silicon Nitride HSI | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Tempstar T8MPT100J20B1 - Silicon Nitride HSI | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu