Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
Tempstar High Pressure Switch for TCA760GKB101 — OEM 1184656 | Ships Today
Tempstar

Tempstar High Pressure Switch for TCA760GKB101 — OEM 1184656 | Ships Today

SKU: 1184656-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This genuine OEM high pressure switch (part number 1184656) is a refrigerant-side safety control on the Tempstar TCA760GKB101 condensing unit. It monitors discharge-line pressure and opens the control circuit to shut down the compressor whenever pressure rises to an unsafe level — protecting the compressor and refrigerant system from damage caused by a dirty condenser coil, a failed condenser fan, an overcharge, or restricted airflow. A faulty switch can either nuisance-trip and stop cooling when pressures are actually normal, or fail to open and leave the compressor unprotected. Common symptoms are an outdoor unit that short-cycles, a compressor that trips out on hot days, and a no-cooling call that clears after the unit cools down.

Specifications

Spec Value
Part Number 1184656
Type High Pressure Switch
Brand Tempstar
Function High-side refrigerant safety cutout
Reset Automatic
Fits Model TCA760GKB101

Compatibility

Direct OEM replacement for the Tempstar TCA760GKB101 air conditioning condenser. Confirm the cut-out/cut-in pressure setpoints and fitting/connector style match your original switch before installing.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the service panel to reach the switch on the high-pressure refrigerant line.
  3. Document — Photograph the wiring and switch location before disconnecting.
  4. Remove — Disconnect the leads and unthread the old switch from its Schrader-style port (the port self-seals, so no recovery is needed on most units).
  5. Install — Thread on the new switch, snug it to spec, and reconnect the leads per your photo.
  6. Test — Restore power, call for cooling, and confirm the compressor runs without nuisance tripping.

Signs You Need a Replacement

  • Outdoor unit short-cycles or trips out on hot days
  • Compressor shuts down even though pressures read normal
  • No cooling that clears only after the unit cools off
  • Switch fails a continuity check at normal operating pressure

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Pressure Switch fit my Tempstar TCA760GKB101 — OEM 1184656 | Ships Today?
Yes. This is the factory-specified OEM pressure switch for the Tempstar TCA760GKB101 — OEM 1184656 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the pressure switch on my Tempstar TCA760GKB101 — OEM 1184656 | Ships Today?
Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.
My furnace shows a pressure switch error. What do I replace?
Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.
Is this pressure switch compatible with Bryant or Payne too?
Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Tempstar pressure switch?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online