Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
Tempstar Defrost Control Board for T4H460GKB200 — Heat Pump | Ships Today
Tempstar

Tempstar Defrost Control Board for T4H460GKB200 — Heat Pump | Ships Today

SKU: 1173636-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This genuine OEM defrost control board (OEM 1173636, DEFROST CONTROL BOARD) is the logic center that manages the defrost cycle on the Tempstar T4H460GKB200 heat pump. Using inputs from the defrost thermostat and the timer interval, it decides when to reverse the system into defrost, energizes the reversing valve, shuts off the outdoor fan, and brings the unit back to heating once the coil clears. When the board fails, the outdoor coil ices over in cold weather, the unit fails to defrost or gets stuck in defrost, the reversing valve won't switch, or the heat pump loses heating capacity entirely. Boards typically fail from surge damage, corroded relays, cracked solder joints, and moisture intrusion.

Specifications

Spec Value
OEM Part Number 1173636
Type Defrost Control Board
Brand Tempstar
Control Voltage 24V
Function Defrost timing, reversing valve & fan control
Fit OEM Direct Replacement

Compatibility

Direct-fit replacement for the Tempstar T4H460GKB200 heat pump and matching ICP/Heil/Comfortmaker outdoor units that use this defrost board. Match the OEM number and connector layout to your existing board before installing.

Installation Guide

  1. Safety First — Disconnect power at the breaker and unit disconnect, then verify zero voltage with a multimeter.
  2. Access — Remove the control-panel service cover.
  3. Document — Photograph every harness connector and the defrost-timer jumper setting before disconnecting.
  4. Remove — Unplug the connectors, release the standoffs or screws, and lift out the old board.
  5. Install — Seat the new board on its standoffs, reconnect each harness per your photo, and set the defrost timer pins to match.
  6. Test — Restore power, initiate a forced defrost, and confirm the reversing valve shifts and the outdoor fan stops.

Signs You Need a Replacement

  • Outdoor coil ices over and the unit never defrosts.
  • Heat pump gets stuck in defrost or runs cold air.
  • Reversing valve or outdoor fan does not respond during defrost.
  • Visible burnt relays, scorch marks, or corrosion on the board.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my Tempstar T4H460GKB200 — Heat Pump | Ships Today?
Yes. This is the factory-specified OEM control board for the Tempstar T4H460GKB200 — Heat Pump | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my Tempstar T4H460GKB200 — Heat Pump | Ships Today?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Tempstar control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online