What are the specs for this Control Board?

The correct replacement for Tempstar model T4H419GKD100 — Heat Pump | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T4H419GKD100 — Heat Pump | Ships Today.

Is this control board compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Defrost Control Board for T4H419GKD100 — Heat Pump | Ships Today

Name: Tempstar Defrost Control Board for T4H419GKD100 — Heat Pump | Ships Today
Brand: Tempstar
SKU: 1173636-GEN
Price: 149.95 USD
Availability: InStock

SKU: 1173636-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM defrost control board (part 1173636) is the brain of the defrost cycle on the Tempstar T4H419GKD100 heat pump. In heating mode, frost builds on the outdoor coil; the defrost board monitors the defrost thermostat and elapsed run time, then temporarily reverses the unit and de-energizes the outdoor fan to melt accumulated ice. It also coordinates the reversing valve and auxiliary heat during the cycle. A failed board leaves the outdoor coil iced over, kills heating performance, or causes erratic, too-frequent or absent defrost cycles.

Specifications

Spec	Value
Part Number	1173636
Type	Defrost Control Board
Brand	Tempstar (ICP)
Control Voltage	24V
Application	Heat Pump Defrost

Compatibility

Built for the Tempstar T4H419GKD100 and matching ICP/Heil/Comfortmaker heat pumps using this defrost board. Match the part number and connector layout to your existing board before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the condenser control-box panel to expose the board.
Document — Photograph every plug, terminal, and the defrost-timer pin setting before disconnecting.
Remove — Unplug each harness connector and remove the board's mounting screws/standoffs.
Install — Mount the new board, set the defrost timer pin to match the original, and reconnect each harness per your photo.
Test — Restore power, run a heating call, and confirm normal operation and a proper forced/initiated defrost cycle.

Signs You Need a Replacement

Outdoor coil iced over during heating
No defrost cycle, or defrost runs constantly
Heat pump won't switch to defrost or back to heat
No response from the board's status LED

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Defrost Control Board f...

$149.95

Frequently Asked Questions

Does this Control Board fit my Tempstar T4H419GKD100 — Heat Pump | Ships Today?

Yes. This is the factory-specified OEM control board for the Tempstar T4H419GKD100 — Heat Pump | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my Tempstar T4H419GKD100 — Heat Pump | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu